Title: locking 'washers' | |
Dodge50 > Technical section > RB44 S66 / S75 4x4 Area | Go to subcategory: |
Author | Content |
chugg89 | |
Date Posted:20/10/2012 11:36:01Copy HTML anyone got a source for the locking tabs/washers used on the 4x4's?
- the ones used to secure the pairs of bolts (4 pairs in total) holding the front hub bearing dust caps in place - the 'toothed' ones used behind the dust caps to secure the front hub nuts (sandwiched between the pair of large thin hub nuts) - the ones used to secure the 7/16 UNF bolt that holds the front brake cylinders in place on the back plate - and the leaf spring eye bolt locking washers for that matter it seemed like a good idea at the time
|
|
Karrier | Share to: #1 |
Re:locking 'washers' Date Posted:20/10/2012 11:49:24Copy HTML I got some of the toothed ones knocking about, will pop a pic up tomorrow to check them.
"Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws."
Douglas Adams
|
DATINFORMATION: dodge50.co.uk takes no responsibility for any mistakes or advice given, it's up to you if you take it or not, remember, All material is copyright dodge50.co.uk 2002-2018 unless it's someone else's and it has been begged, borrowed or made up.
DISCLAIMER: Any libel or mistakes in messages that are written by members of the community, inc the admin's and owner of this site, dodge50.co.uk takes no responsibility for them, you need to contact the author and have a moan / send a writ / agree. (delete as you see fit) Blah Blah Blah Blah Blah Blah.......Etc.......Etc...........