Title: front wheel bearings and seal s56 mk2 | |
Dodge50 > Technical section > TECHNICAL | Go to subcategory: |
Author | Content |
blip | |
Date Posted:03/06/2014 02:32:36Copy HTML Need to replace wheel bearings and hub seal on s56 mk2. Can anyone tell me if the wheel bearings are the same on a mk1 s56 with drums and a mk2 s56 with discs.I have some numbers for the mk1 but no info for the mk2 inner bearing Timken 2788/2720 outer bearing Timken 30305 Anyone got any numbers for the seal? Regards. |
|
Karrier | Share to: #1 |
Re:front wheel bearings and seal s56 mk2 Date Posted:04/06/2014 11:28:54Copy HTML front bearings and hub seals are the same on mk1/2 as are the rear BUT only if the axle set up is the same, ie a x6 or ax 8, most S56 Mk1 and mk2 vehicles had ax6 axles but there were also two different hub sizes available, again most had the standard, if you have the chassis numbers for both i should be able to tell you for sure, using the hub seals though isn't really a good idea as getting them out with no damage is hard to do, also if the mk1 rear axle is an old one it might have a different type of hub seal.
ok i have managed to make that sound more complicate than it could be. do you mean front axle? see above do you mean rear axle? see above i can give you the seal numbers but need to know which axle, so chassis numbers is best "Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws."
Douglas Adams
|
|
blip | Share to: #2 |
Re:front wheel bearings and seal s56 mk2 Date Posted:05/06/2014 11:34:47Copy HTML Thanks for confirming that the front axle wheel bearings are the same on mk1/mk2. Timken 2788/2720 inner bearing (two numbers as bearing race and bearing cup have seperate numbers) Timken 30305 outer bearing (one number as race and cup come complete) Could you let me have a hub seal number for the front axle hub? Regards and thanks |
|
Karrier | Share to: #3 |
Re:front wheel bearings and seal s56 mk2 Date Posted:05/06/2014 05:12:24Copy HTML I can send you a pair of original front hub seals for £20 inc postage :)
I don't have the number to hand "Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws."
Douglas Adams
|
|
Karrier | Share to: #4 |
Re:front wheel bearings and seal s56 mk2 Date Posted:05/06/2014 07:43:30Copy HTML The Renault front hub seal number is 0073167005
"Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws."
Douglas Adams
|
|
blip | Share to: #5 |
Re:front wheel bearings and seal s56 mk2 Date Posted:10/06/2014 03:39:14Copy HTML Thanks for info. Will be in touch re seals by P M.
|
DATINFORMATION: dodge50.co.uk takes no responsibility for any mistakes or advice given, it's up to you if you take it or not, remember, All material is copyright dodge50.co.uk 2002-2018 unless it's someone else's and it has been begged, borrowed or made up.
DISCLAIMER: Any libel or mistakes in messages that are written by members of the community, inc the admin's and owner of this site, dodge50.co.uk takes no responsibility for them, you need to contact the author and have a moan / send a writ / agree. (delete as you see fit) Blah Blah Blah Blah Blah Blah.......Etc.......Etc...........